2024-05-30 LabMCoP Meeting Notes

Date

30 May 2024

Attendees

Pesent	Name	Organization
regrets	Nancy Cornish	CDC
X	Manjula Gama-Ralalage	CDC
X	Riki Merrick	APHL
regrets	Christina Gallegos	APHL
X	Amy Liu	Inductive Health / APHL
X	Raj Dash	Duke / CAP
regrets	John Snyder	National Library of Medicine (SNOMED CT)
	Andrea Pitkus	UW
X	Kathy Walsh	Labcorp
	Rob Hausam	Hausam Consulting
	Doug York	APHL
	Pam Banning	3M
	Sandy Jones	CDC

Discussion topics

Upcoming OOO	Yes	We are now using https://aphlinformatics.atlassian.net/wiki/spaces/LMCOPL/calendars and everyone can just keep it updated NOTE: you will need to use type “Event” if you do not have a confluence account
Previous Action Items	No	Nancy Follow up: EDTA Stopper top EDTA sufficient or do we need to specify K2 or K3? Nancy can review the list in SNOMED from John Need to check on completeness against the Anne/Nancy list (compare with ARUP) Nancy/Anne’s list is 10 years old - may not want to compare with this outdated list and use ARUP and Labcorp lists Raj: I found this at a phlebotomy certification course website: What Color Tubes Are Used for Which Tests in Phlebotomy – PhlebotomyU Here's a nice one-pager (University of Colorado Health): https://www.testmenu.com/universityhospital/TestDirectory/SiteFile?fileName=sidebar\CLNLAB-2020-03-13-Blood-Tube-Color-Chart.pdf Cleveland Clinic: Blood Collection Tubes - Collection \| Cleveland Clinic Laboratories https://phlebotomygeeks.yolasite.com/resources/PRINT OUT COMMON TUBES.pdf but color is manufacturer dependent, which is why we named the tubes by the additives there are container types in SNOMED under 706049005 \|Blood tube (physical object)\| Have a start here: https://aphlinformatics.atlassian.net/wiki/download/attachments/2018312270/ContainertypesListRikiEmailed20171013.xlsx?api=v2 K1 or K2 might be important to differentiate We should leave the top color out of it, since that is manufacturer specific Contact United Network for Organ Sharing for input on donor terms (pre-coordinated or not?) = Contact - UNOS Riki filled out the form - No repsonse ISBT 128 \| ICCBBA \| Technical Documents Scott’s response: “When the SNOMED representative referred to the existence of “donor codes,” they might be referring to the ISBT-128 coding standard that’s managed by ICCBBA. Please see their website: ISBT 128 \| ICCBBA, and navigate to view their technical documents: ISBT 128 \| ICCBBA \| Technical DocumentsFDA’s regulations for human cells, tissues, and cellular and tissue-based products (HCT/Ps) in 21 CFR part 1271 require assignment of a “distinct identification code” to facilitate tracking HCT/Ps (see 21 CFR 1271.290(c)) but I don’t believe this is relevant to your question.” Might be a topic for SNOMED International We may need to reach out to laboratories/industry to see if the donor codes are needed (we need to show that these codes are needed.) Amy follow up - check if she has all of these nasal sinus fluid definition surgical insertion site peritonealDialysisTunnelSite surgical insertion site peritonealDialysisSite Riki’s Follow up - none of these got done yet 😞 liquid-based cytology specimen vial = https://us-request.ihtsdotools.org/#/requests/preview/354843?fromList=truehttps://request.ihtsdotools.org/#/requests/edit/786429 submit a code for formalin10 work with John new term for pacemaker insertion site sample in SCT there are only swabs for insertion sites (line, drain, chest tube, vascular catheter) - this should be fixed we should model it after 435971000124108 \| Body fluid specimen from peritoneal dialysis insertion site (specimen) and require method, which should be aspirate For wound modeling (see 2023-11-30 LabMCoP Meeting Notes ) create a few pre-coordinated specimen terms to cover the wound causes as children under: 119365002 \| Specimen from wound (specimen) another child term for aspirate under 445611000124106 \| Specimen from bite wound (specimen), since that is preferred over the existing swab IDSA has a guidelines for wound cultures (deep and superficial - related to surgical wounds) - link sent to Amy John: 460621000124104 \|Superficial surgical incision wound (morphologic abnormality)\| - created in US extension in 2019. Is this needed? If so, then LabMCoP/APHL should promote it to SNOMED International to retain US SNOMED identifier. John submitted this to be promoted: https://request.ihtsdotools.org/#/requests/edit/959920?fromList=true SNOMED guidance related to morphological abnormality: Morphologic Abnormalities vs. Findings - SNOMED CT Editorial Guide - SNOMED Confluence
Specimen CMT - review of terms with questions	Yes	Remove wound_postsurgical - duplicate to wound_Surgical Adding NHSN terms adiposeTissue use domain micro, since NHSN partial - must have body site, nice to have laterality also add to pathology domain adrenal gland specimen not sure why this is an NHSN term - usually only collected for neoplasm detection fine needle biopsy with source site should cover artery specimen not sure why this is here for NHSN - maybe we shoudl get the current list to ensure we are only consdiering what is current Amy is reviewing
ADJOURNED	Yes	12:27 PM ET
Specimen CMT pilot implementers	No	Review where we are: Vendor Connections no update
Specimen CMT - Hosting Options	No	How can we publish the content in the dB? Allow access somehow to query the dB as access or excel or csv Using FHIR conceptMap similar to Conceptmap-example-specimen-type - FHIR v6.0.0-cibuild - based on this profile: ConceptMap - FHIR v6.0.0-cibuild riki.merrick to ask Eric if he still has that or how he built it: ANSWER FROM ERIC: if you look in the xml source Conceptmap-example-specimen-type.xml - FHIR v6.0.0-cibuild . you can see how it is mapped. I am not sure if you mean the table rendering or creating the concept map from a spreadsheet or CSV file. The FHIR build tool did the table rendering for that mapping, I think I entered the data by hand, or Grahame did it. It would not be hard to create a script to create a concept map from an excel or csv file if needed. The table needs to be large enough to make it worthwhile though. you could even create formula cells in the spreadsheet to generate the XML or json for each item. and then copy to a text editor and append to the Metadata fields. There will be a call Clinical Architecture on May 3rd to discuss moving specimen CMT to Symedical Manjula will take a look at the concept map
Specimen CMT - education	No
Specimen CMT - tracking implementation impact Setting baseline Define metrics	No
Specimen CMT - Compare to NHS Medical Terminology testing	No
LOINC to SNOMED CT mapping	No
Future projects for this call after CMT	No	In general the call is intended as a forum for ANY messaging related issues to work out. In the past we have reviewed containers re-vive that - and how does that interact with devices (UDI identification?) review code systems around additives (HL70371 and SCT substance and product hierarchies) started work on cross-mapping between HL7 method codes and SNOMED CT procedure / technique concepts American College of Surgeons is working on procedure protocol and synoptic data elements / surgical synoptic reports - we could work with them together on that Look at other HL7 tables that we would want to migrate SCT (i.e., Specimen Condition table, etc.)

Chat:

Recording:

Action items

Quick decisions not requiring context or tracking

For quick, smaller decisions that do not require extra context or formal tracking, use the “Add a decision…” function here.

Decisions requiring context or tracking

For decisions that require more context (e.g., documentation of discussion, options considered) and/or tracking, use the decision template to capture more information.